High flexibility, highest output for small boards soldering, 3 section conveyor inline machine!!!
Mas-i4 is an inline machine with the following features:
- 2 drop jet fluxer as standard.
- Bottom IR preheating & top preheating zone.
- 2 solder pot in individual Z axis, each solder pot is with 2 wave tunnels.
- 3 sections of conveyors.
- PCB conveyor in and fixed, solder pot/fluxer moving.
- Flux, preheating, soldering 3 process in parallel.
- Flux table with XY motion table, soldering table with X, Y, Z1, Z2 motion table.
- WINDOWS 10 system.
- Standard equipped with wave height calibration.
- Real-time soldering process monitor.
| MAS-i4 Specifications | ||
|---|---|---|
| Item | MAS-i4 | |
| General | ||
| Operating power/Max power | 8KW/25KW | |
| Conveyor width | Max 510mm | |
| PCB size | As explanation | |
| PCB top clearance | 100mm | |
| PCB bottom clearance | 35mm | |
| Machine dimension | 3360(L)*1750(W)*1650(H) | |
| Net weight | 1800KG | |
| Power supply | 3PH 380V 50HZ | |
| Air supply | 3-5 bars | |
| Exhausting required | 800M3/h | |
| PC | Yes | |
| Typical Program Time | 10 Minutes | |
| PCB Robotic Platform | ||
| Flux Nozzle Type | drop jet fluxer made in Germany | |
| Flux Nozzle Quantity | Standard equip 2 set | |
| Flux Tank Capacity | 1L | |
| Flux Tank Quantity | 2pcs | |
| Flux Nozzle Distance | width adjustable by software | |
| Axes of Motion | X, Y Servo motor | |
| Position Accuracy | +/- 0.05mm | |
| preheat | ||
| Preheating method | Top IR preheat,option with bottom preheat | |
| Solder Management | ||
| Solder pot type | Standard equipped mechanical pump | |
| Solder pot quantity | 2 individual sets | |
| Solder Pot Capacity | 30kgs/pot x 2pots | |
| Solder Pot distance | 240mm--300mm software adjustment | |
| Solder level alarm | standard equipped | |
| Wave tunnel | 2set/pot x 2pots | |
| Wave distance | 160--255mm manual adjustment | |
| Mini Wave Nozzles | Dia 4, 6, 8, 10, 12MM | |
| Customized nozzle | Available | |
| Axes of Motion | Pot 1&2 share X, Y. Pot 1 with Z1, Pot 2 with Z2 | |
| Motion Control | All servo control with ball screw | |
| Position Accuracy | +/- 0.05mm | |
| (N2) Inertion Management | ||
| N2 Consumption per Nozzle | 1.5m3/H, total 6m3/H (recommend to use SELMATE-8) | |
| Required N2 Purity | >99.99% | |