Welcome to Sasinno
Sasinno: Smart and Steady Innovation
PCB is moved by the X/Y table with servo motor. Solder pot is moved in Z with servo motor. Drop jet flux is moved in Z with air cylinder.
PCB is moved by the X/Y table with servo motor. Solder pot is moved in Z with servo motor. Drop jet flux is moved in Z with air cylinder.
PCB will be moved in a conveyor systems with stainless steel wheels. After being stopped, it will be side clamped by rear clamper cylinder.
MAS-i2 Selective Soldering Machine is formed by three processes as blow and all the processes are integrated into one compact machine.
Unit-i1 is a compact inline machine with one drop jet fluxer, bottom IR preheating, and one solder pot with one wave tunnel. The PCB moves in by conveyor.
Unit-i4 is a new generation of selective wave soldering with two drop jet fluxers, bottom IR preheating, and two solder pots in two individual wave tunnels.
Mas-i4 is an inline machine with two drop jet fluxers as standard. It also has a bottom IR preheating & top preheating zone and two individual solder pots in the Z axis.
This machine is designed with a dual rail conveyor (W580xL508mm), four individual solder pots, and can solder four boards simultaneously. It also can expand to solder six pots.
This machine is designed with a dual rail conveyor (Max W320xL500mm), four individual solder pots, and can solder four boards simultaneously. It also can expand to solder six pots.
Providing the highest output, ROI, and quantity control capability, MAStamp-151 is the latest generation selective stamping soldering machine.
Machine working concept: This system can make 4 cu m of N2 per hour with 99.99% purity, which is enough for one set of Ant-i2 machines’ usage.
Machine working concept: AI-400 is a standard insertion platform with various component feeders that can easily help realize insertion automation especially for…
Machine working concept: AI-606 is a standard insertion platform with various component feeders that can easily help realize insertion automation especially for…
Machine working concept: BA-450 is an inline AOI equipment for THT component soldering joint inspection. It is equipped with an HD digital camera and advanced algorithms.
Machine working concept: DA-1200 is a new kind of automatic AOI equipment for THT component with high-cost performance, which can be easily installed.
Machine working concept: The unit provides a ‘normal open’ passage in a PCB assembly line. An integrated conveyor segment slides across the opening to deliver the PCB.
Machine working concept: The inspection conveyor is used when frequent visual inspection of PCBs is required on the PCB assembly line.
Machine working concept: The unit loads the production line automatically by pushing PCBs out of a magazine onto the conveyor of the downstream machine.
Machine working concept: The unit loads the production line automatically by pushing PCBs out of the magazine onto the conveyor of the downstream machines.
Machine working concept: The unit provides automatic magazine changeover for continuous line unloading. PCBs are collected from an upstream pusher conveyor.
Machine working concept: The PCBs are collected from the upstream machine and placed onto a shuttle conveyor that is pushed into the designated magazine. The shuttle conveyor moves sideways…